Technological Innovation
Tel:86-25-51873962
86-25-51873963 86-25-51873961
Address:9th Floor, Building 1, Zijinxicheng Center, No.118, Olympic St., Nanjing
Email: export@nova-china.com
Technological Innovation

Network type shuttle

Date:2015-07-10    【size:Big Middle Small

With the continuous demand of intensive storage, the application of the shuttle bus is widely used. Single put-in shuttle car is mainly used in shuttle rack system, and forklift can be used in conjunction, can also be combined with stacker / cluster shuttle car use. The tunnel is relatively short (usually about 30 to 50 meters), its compact, flexible operation, easy to charge, can achieve the first in goods (FIFO) and the first out (LIFO).
Into the type of shuttle car with forklift layout plan
Layout


(Figure 1)
First in first out (FIFO) mode:
Features: 1, forklift operation area is located at the ends of the shuttle car shelf, can effectively separate the cargo area and shipping area, convenient on-site management;
2, the goods by the shuttle bus to the end of the shelf into the other end, the goods in the order of the stack, the order of the stack, can be achieved on the order of the goods, in line with general logistics requirements;
3, shuttle vehicles on both sides of the layout of the fork lift truck;
4, compared to the first out (LIFO) mode, the dynamic storage rate is low;
After entering the first out (LIFO) mode:
Features: 1, forklift operation area is located at the end of the shuttle car shelf, on the cargo area and shipping area with the region, the site management complex;
2, due to unilateral import and export of goods, can improve the capacity of;
3, suitable for delivery of goods in the order of not strict;
4, compared to the first in first out (FIFO) mode, high dynamic storage rate;
Suitable for the tray material including plastic tray (pass), wooden pallets (wooden), steel pallet Fang Tonghang for standard pallet standard GB pallet L1200*W1000mm, Japan and South Korea tray L1100*W1100mm, Ou tray L1200*W800mm, American standard tray L1219*W1016mm.
The main technical parameters of the shuttle car are as table 1.


序号
主要技术指标
参考值
1
承载能力(kg
Max=500
Max=1000
Max=1500
2
满载行走速度(m/min
50
40
30
3
空载行走速度(m/min
67
4
顶升行程(mm
45
5
顶升单动时间(秒)
1.1
1.5
1.5
6
顶升后托盘与轨道的距离(mm
25
7
托盘尺寸(mm
1200×1000×150
8
托盘类型
川字型、田字形
9
托盘挠度(mm
Max=20
10
托盘间距(mm
Min=40
11
行走定位精度(mm
±5
12
供电方式
磷酸铁锂电池组
13
电池容量(AH

55

14
电池充放电次数(次)
900
15
充满电工作时间(H
8
16
电池重量(kg
Max=16
17
通信方式
无线电
18
控制模式
手动控制/自动控制
19
行走结构形式
4
20
行走轮
高性能聚氨酯
21
工作噪音(db
40~60
22
使用环境温度
-15oC-40oC

(Table 1)
The three view of the shuttle car is shown in Figure two

(Figure two)
Into the shuttle car is mainly the following several applications:
1.1 semi auto shuttle car + forklift truck / stacking machine + handheld remote controller
1.2 semi automatic shuttle car +AGV+ handheld remote control
1.3 fully automatic shuttle car + stacking machine
1.4 automatic shuttle car put-in + cluster shuttle car + stacker
1.5 automatic shuttle car put-in + cluster shuttle car + hoist
1.6 automatic logistics sorting system
This paper mainly introduces the form of the type of the shuttle car is as follows: the semi - automatic shuttle type shuttle car + forklift / crane + handheld remote controller.

Copy right © 2010 -2013

 Jiangsu NOVA Intelligent Logistics Equipment Co.,Ltd  Support By ManyNet china Suppliers.Friend Links