What are the accessories and how to use drive in pallet racking?

Drive in pallet racking can be used for forklifts (or unmanned trucks with forks) to drive into the aisle to access goods and is suitable for storage of goods of small variety and large volume types. The following is an introduction to the accessories and usage of drive in pallet racking.

Accessories

How to use

Accessories

Drive in pallet racking requires a large number of accessories because of the dense storage of goods and the high stability requirements. The accessories are connected to the racking column pieces so that the goods can be stored safely and densely on the bull leg beams, maximizing the use of space. The accessories of drive in pallet racking include: bull leg (the main connection between bull leg beam and racking column, single-sided and double-sided), bull leg beam (the main support shelf for goods storage), top beam (the connection of racking column), top pull (the connection of racking column), back pull (the connection of racking column, when the racking is arranged in one direction), foot guard (the frontal protection of racking), rail guard (the protection of racking when forklift enters the aisle) etc.

How to use

Better use of drive in pallet racking need to pay attention to is, in the design of a new warehouse or renovation of an existing warehouse, then it is necessary to review the characteristics of the system applied in the warehouse study. For example, if drive in pallet racking can achieve maximum storage capacity in minimum space, then this is an economical logistics solution. When using drive in pallet racking, loading and unloading are done from one side, which can effectively improve time efficiency.

Drive in pallet racking, a whole building of continuous racking that is not divided by aisles, is stored on support rails (bull leg beams) with pallets in the depth direction, one right after the other, which makes high-density storage possible. Drive in pallet racking is suitable for storage of goods with few varieties and large quantities, often used to store large quantities of the same type of goods, with high utilization of space, suitable for the food industry, chemical industry, garment industry, cold storage, and other occasions with high storage space cost, and its storage cost per unit site is relatively low.

Drive in pallet racking can be divided into one-way and two-way arrangements according to the pick-up direction, one-way (against the wall area) the total depth of the racking is best controlled within 6 pallet depth, two-way (the middle area can be picked up on both sides) the total depth of the racking area is best controlled within 12 pallet depth, to improve the efficiency and reliability of forklift access (such racking system, forklift for continuous "high lift high hit "operation mode, forklift easy to shake and hit the shelves, so the stability of the consideration of adequate or not is essential). This kind of storage system stability is weak, the shelves should not be too high, usually should be controlled within 10 meters, and to strengthen the stability of the entire shelving system, in addition to the specifications, selection to be larger, but also must be equipped with a pulling solid device. A single pallet of goods should not be too big and heavy, usually, the weight should be controlled within 1500KG, and the pallet span should not be larger than 1.5m. The forklift is often equipped with a forward-moving electric forklift or counterbalanced electric forklift.

Jiangsu NOVA Intelligent Logistics Equipment Co., Ltd. is committed to producing high-quality drive in pallet racking, and our company has many years of experience. Welcome to contact us.